Wall Mounted Ultrasonic Flow meter MFU-6200
The MARMONIX Wall Mounted Ultrasonic Flow meter MFU-6200 widely used for water supply, Non-conductive liquid, such as the distilled water, food oil and light oil, boiler fuel oil engine for diesel measurement, and air conditioner system to measure the flow and heat. Food and beverage, pharmaceutical, ballast water, fuel consumption and other processes on-board ships, etc.
Wall Mounted Ultrasonic Flow meter MFU-6200 Features
- Simplified installation
- Virtually maintenance free
- No process shot-down
- Cost advantage over magnetic flow meter
- SD card optional
Wall Mounted Ultrasonic Flow meter MFU-6200 Specifications:
Item | Specification |
Accuracy | 1% of reading at rates >0.2mps |
Repeatability | 0.2% |
Principle | Transmit time |
Velocity | ±32m/s |
Pipe Size | Dn15mm-Dn6000mm |
Display | LCD with backlight, Display accumulated flow/heat, instantaneous flow/heat, velocity, time etc. |
Signal Output | 1 way 4-20mA output |
1 way OCT pulse output | |
1 way relay output | |
Signal Input | 3 way 4-20mA input achieve to heat measurement by connecting PT100 platinum resistor |
Other Functions | Automatically record the positive, negative, net totalizer flow rate and heat. Automatically record the time of power-on/off and flow rate of the last 30 time. Replenish by hand or read the data through Modbus communication protocols. |
Pipe material | Carbon steel, Stainless steel, cast iron, cement pipe, copper, PVC, Aluminum, FRP etc. Liner is allowed |
Straight Pipe section | Up steam: 10D;Â down steam: 5D;Â From the pipe:30D; (D means outer diameter) |
Liquid Types | Water, sea water, industrial sewage, acid and alkali liquid, alcohol, beer all kinds of oil which can transmit ultrasonic single uniform liquid. |
Liquid Temperature | Standard: -30ºC~90ºC, High-temperature: -30ºC~160ºC |
Liquid Turbidity | Less than 10000ppm, with a little bubble |
Flow Direction | Bi-directional measuring, net flow/flow heat measuring |
Environment temperature | Main unit: -30ºC ~ 80ºC |
Transducer: -40ºC 110ºC, Temperature transducer: select on enquiry | |
Environment Humidity | Main unit: 85% RH |
Transducer: standard is IP65, IP68 (optional) | |
Cable | Twisted Pair line, Standard length of 5m, Can be extended to 500m (Not recommended) contact the manufacturer for longer cable requirement, RS-485 interface, transmission distance up to 1000m |
Power Supply | AC220V and DC24V |
Power consumption | Less than 1.5W |
Communication | MODBUS RTU RS485 |
Reviews
Clear filtersThere are no reviews yet.