Marmonix MVS-400 Video Borescope System

The MVS-400 industrial endoscope camera puts a 3.9 mm, 2 MP camera head with eight LEDs on a 5 m cable and shows the view live on a 5-inch IPS screen, so you can look inside engines, pipes and machinery without taking them apart. Photos save at 1920×1080 and video at 1280×720 to a TF card of up to 32 GB. Compare it with the other cameras in our video borescopes range.

Industrial Endoscope Camera MVS-400

The Industrial Endoscope Camera MVS-400 is a highly sophisticated tool designed for conducting detailed visual inspections in a variety of industrial applications. With its 2MP camera, this endoscope delivers high-resolution images (1920×1080 in JPG format) and video recordings (1280×720 in AVI format), ensuring that every detail is captured with clarity and precision.

Equipped with a large 5-inch IPS screen, the MVS-400 offers users vivid and sharp visuals with a screen resolution of 1280x720P. This feature enhances the user experience by providing clear and detailed images that are essential for accurate inspections.

One of the standout features of this endoscope is its depth of field, which ranges from 2 to 10cm, allowing for precise focus on objects at varying distances. This capability is particularly useful in complex industrial environments where detail and accuracy are paramount.

The MVS-400 is built to withstand challenging conditions, as evidenced by its IP67 waterproof rating. This ensures that the camera can operate effectively in wet or dusty environments, making it suitable for a wide range of industrial settings.

With a 70° viewing angle, the MVS-400 offers a comprehensive view of the inspection area, reducing the need for frequent repositioning. This wide-angle view is particularly beneficial in confined spaces where maneuverability is limited.

Powered by a 2000mAh battery, the MVS-400 is capable of up to 3 hours of continuous use, ensuring that lengthy inspections can be completed without the need for frequent recharging. The device also features a USB-C port and a TF card slot that supports up to 32GB, allowing for easy storage and transfer of images and videos.

The MVS-400 is designed with a 3.9mm lens that boasts an impressive 5 meters range, providing unparalleled flexibility and reach for thorough inspections in hard-to-reach areas.

the Industrial Endoscope Camera MVS-400 is a robust, versatile, and high-performance tool that meets the diverse needs of industrial inspections. With its high-quality imaging, advanced features, and durable design, it represents a valuable asset for professionals seeking to maintain the highest standards of operational safety and efficiency in various industrial environments.

Industrial Endoscope Camera MVS-400 specifications:

Every published MVS-400 figure, from sensor to battery:

• Pixel:2MP
• Probe diameter:3.9mm
• Length: cable 5m
• Monitor: 5 inch IPS IPS screen
• Screen Resolution: 1280*720P
• Image Resolution: 1920*1080(JPG)
• Video Recording: 1280*720(AVI)
• Depth of field:2-10cm
• Camera waterproof: IP67
• Viewing Angle:70°
• Temperature:-10°C-509C
• Battery capacity: 2000mhA/3h
• Port:USB-C,
• TF Card slot (Support 32GB)
• Light: 8pcs LEDs
• Zoom:1.0-1.5-2.0X

Buying guide: Read our video borescope buyer’s guide.

How a thin-probe borescope is used for remote visual inspection

Remote visual inspection is the step maintenance teams take before they dismantle anything: a camera goes in through an existing opening and the image decides whether a strip-down is needed. A typical job runs in four stages:

• Check the access hole first: the probe must pass the narrowest point, which is why a 3.9 mm head reaches spark-plug bores, drain points and small ports that wider heads cannot.
• Set focus distance by moving the cable: the 2–10 cm depth of field means the sharpest image comes from holding the tip a few centimetres from the surface, not pressed against it.
• Light and zoom before you record: adjust the LEDs to cut glare on wet or shiny metal, then use the 1.5× or 2× digital zoom to frame a crack, deposit or loose part.
• Record evidence, not memory: save a photo or clip at each point so a second engineer can review it and the next inspection can be compared with this one.

The IP67 camera rating is defined in IEC 60529 as dust-tight and protected against temporary immersion, which suits wet tanks and condensate lines; the handset itself should still be kept out of water. Rigid-cable probes like this one hold their shape for straight runs but cannot steer around tight bends, so plan the entry point on the shortest straight path to the target.

Questions about the MVS-400

Can the MVS-400 go underwater?

The camera head is rated IP67, so it can be used in wet pipes and tanks and briefly submerged; keep the 5-inch handset dry.

How long does the battery last on the MVS-400?

About 3 hours of continuous use from the 2000 mAh battery, recharged through the USB-C port.

Where are MVS-400 photos and videos stored?

On a TF (microSD) card of up to 32 GB inserted in the handset; photos are JPG at 1920×1080 and videos AVI at 1280×720.