Wall Mounted Ultrasonic Flowmeter MFU-6300
Wall Mounted Ultrasonic Flowmeter MFU-6300 widely used to measure different kinds of liquid.
Wall Mounted Ultrasonic Flowmeter MFU-6300
Wall Mounted Ultrasonic Flowmeter MFU-6300 widely used to measure different kinds of liquid.
Transmitter and transducer install separately. Transmitter can install at indoor, Instrument cabinet, Dashboard.
Transducer install on the pipes. Transmitter and Transducer connect by special cable.
It can realize to measure flow. Connect with temperature sensor, it can measure heat flow.
Widely used in Running water, Heating, Water conservation, Metallurgy, Chemical industry, Machinery, Energy etc.
Used for production monitoring, water balance testing, thermal equilibrium network commissioning, energy monitoring. It is most important flow measure instrument during manufacturing process.
Wall Mounted Ultrasonic Flowmeter MFU-6300 Features
- Accuracy: better than 1%
- Measure Range: Select different model sensors, can achieve DN15-DN6000mm pipe flow measurement
- Reliability: Adopt low voltage, multi-pulse radiating circuit. Accuracy, Lifetime and Reliability are better
- Anti-interference: Adopt double balanced signal differential transmission, receiving circuit, effective resist the drive, tower, Strong power lines and other source of interference.
- Memory Function: Automatic memory the cumulative flow of 512 days before, 128 months before, 10 years before.
- Automatic memory the power-on and off of 64times before and the flow. Automatic memory the meter working condition of 32days before
- Temperature Sensor: Connect with Temperature sensor, it can measure heat flow.
- SD card memory: Select SD card memory,it can realize mass storage by ultrasonic flowmeter
Wall Mounted Ultrasonic Flowmeter MFU-6300 Specifications:
| Type | Performance, Specification | |
| Principle | Ultrasonic transit-time principle, Four-byte IEEE754 floating-point arithmetic | |
| Accuracy | Better than ±1% | |
| Display | LCD display with Chinese, English Display | |
| One 4-20mA Current output,Impedance0-1K,Accuracy 0.1% | ||
| Output | One OCT Pulse output(Width 6-1000ms,Default200ms) | |
| Transmitter | One Relays output | |
| Input | Three4-20mACurrentinput,accuracy0.1%,cancollecttemperature,pressure,levelsignalsetc | |
| Can connect with three-wire PT100 Platinum resistance to measure heat flow | ||
| Data Interface | Isolated RS485 interface, can upgrade flowmeter through PC, support mudbug | |
| Cable | Normal below 50m;Select RS485 Communication, Transmission distance can over thousand meters. | |
| material | Steel, Stainless steel, Cast iron, copper, PVC, aluminum, FRP etc.(liner allowed) | |
| Pipe condition | Diameter | 15~6000mm |
| Installation | Upstream 10D,downstream 5D,30D away from the pump outlet(D for diameter) | |
| Medium | Fluid | Water, sea water, acid liquid, beer, alcohol, oil and any other liquid that can spread sonic |
| Temperature | -30~160 degree C | |
| Turbidity | 10000ppm and with little bubbles | |
| Velocity | 0~±10m s | |
| Operating Environment | Temperature | Transmitter:-20~60 degree C; Transducer:-30~160 degree C |
| Humidity | Transmitter:85%RH;transmitter protection grade:IP68;Water Depth<2m | |
| Power Supply | DC8-36V or AC85-264V | |
| Consumption | 1.5W | |
Downloads
Reviews
There are no reviews yet.