CO is a health threatening invisible gas without any smell that must be monitored and observed permanently in industrial plants and even urban territories.
MCO-1001 is a reliable meter that measures the concentration of carbon monoxide and the ambient temperature and equipped with the sound and light alarm to help the operators more efficiently.
The device is widely used petroleum industry, chemical plants, mining, metallurgy, paper making, fire fighting, laboratories, food industries, etc.

Carbon Monoxide meter MCO-1001 Features

• Large display with the max and instant value
• Light alarm
• Solid shell and robust electrical characteristics
• Increasing and decreasing of the frequency of audible alarm after changes in the concentration of CO
• Reliable electrochemical sensor
• LCD backlight
• Auto power off
• Low battery indication
• Maximum, average and data retention
• Buzzer alarm limit settings
• Setting the highest and lowest concentration of CO

Carbon Monoxide meter MCO-1001 Specifications:

MCG-500 is a hand-held combustible gas detector that detects the combustible gas leakage immediately. The audible alarm added to a flashing LED alarm helps the operator scan the environment properly. The visual and acoustical alarms help the operator to locate the gas leakage source precisely.
In clean environment the beep-rate of the device is within 4-8 times per second and the rate increases if the device approaches to the source, you can easily adjust the beep-rate.
The meter detects gases including: Natural gas, CO, Smoke Butane, Propane, Methane, Ethanol, Ammonia, Gasoline, industrial solvents, etc.

Combustible Gas Detector MCG-500 Features

• Adjusting sound alarm rate
• LED alarm
• Automatically reset
• High sensitivity
• Quick response time
• Monophony earphone socket to avoid the noise
• Reset button on the probe handle

Combustible Gas Detector MCG-500 Specifications:

MCO2-100 Pump-priming Portable Gas Detector Is a continuous monitoring of CO2 gas detection equipment. This product is suitable for environmental monitoring, industrial production, and other harmful gases working environment, which can effectively protect the health and safety of staff is not compromised.

MCO2 100 Features

•  Smart probe design, calibration and
•  Maintenance more convenient in the future;
•  Fault, Warning, operator error, and the alarm will be smart tips;
•  Built-in CF calibration coefficients (VOC measurements only valid);
•  With audible alarm and visual alarm function, the status bar also displays alarm status;
•  Full-color 3.5-inch TFT screen, color LCD display, and intuitive;
•  Can be both a digital and curved display of gas concentration in two ways;
•  With a USB communication port, you can speed 9600 bytes to communicate directly with the computer;
•  With the test record function, can store a month’s measurement data and instrument or the computer can view the data
•  With the alarm recording function, you can record the last four times the alarm times and type;
•  With calibration record; can record the last four times the size of the calibration time spam;
•  High-capacity lithium battery-powered, rechargeable, low-battery automatic shutdown;
•  Can be set high reported, underreporting, TWA, STEL, shutdown time, pump speed, etc.

Gas Detector MCO2 100 specifications:

MSF6-1000 portable infrared gas detector is a kind of hand-held instrument that can perform continuous measurements of gas. This leakage detector adopts an imported gas infrared sensor, utilizes a unique method of data processing, and has the functions of high sensitivity, quick response, good stability, automatic modification of zero drift as well as a speech alarm output, etc.

The hand-held design facilitates carrying and testing; a light-emitting display screen of organic matter is adopted, and the display is clear without a lamp light when it operates at night.

MSF61000 Features

•  NDIR” non-dispersive infrared ” principle.
•  OLED screen, self-luminous with low power consumption and high brightness, with no problem with visual angle.
•  High sensitivity; the detection resolution of leakage can reach 0.1ppm.
•  High precision and good stability.
•  Quick response and recovery.
•  Multi-level speech and light alarm.
•  Can be charged by USB or AC adopter, convenient and quick.
•  Storage and inquiry of measurement data.
•  Read and analyze the data by PC software through USB.
•  Long lifespan of the sensor.

 Gas Detector MSF6-1000 specifications:

MCC-452 is a portable 2-in-1 gas detector that can continuously detect the concentration of CO2 gas and CO. It is applied in buildings, offices, class experiments, greenhouses, agriculture and forestry, vegetable shed&, etc.

Portable 2-in-1 Gas-Detector MCC452 Features

• Small volume, convenient to carry.
• Auto self-calibration when powered on.
• Detection of two target gases at the same time.
• Long probe for narrow room.
•  Prompt when the battery is exhausted.

Portable 2-in-1 Gas-Detector MCC 452 specifications:

MCG-600 is a handheld meter that indicates and measures the concentration of the natural gas and propane with acceptable accuracy in a short time.
The device is an ideal tool for wherever that the operator needs to monitor the leakage of the gases.
MCG-600 is widely used in the natural gas stations, power plants, laboratories, etc.

Combustible Gas Detector MCG-600 Features

• Japan made catalytic sensor provides excellent temperature independency to LNG/CNG
• Max value instantly displayed designed for patrol jobs
• %LEL and %V/V concentration unit optional
• Ex ib IIB T4 Gb approved 1500mAh Li-ion rechargeable battery ensures ability of explosion proof

Combustible Gas Detector MCG-600 Specifications:

MSF6-2000 Portable Gas Detector Is a continuous monitoring of a variety of single gas detection equipment. This product is suitable for environmental monitoring, industrial production and other harmful gases working environment, which can effectively protect the health and safety of staff is not compromised

Portable Infrared Gas Detector MSF6-2000 Features

• Intelligent Probe design; convenient calibration and maintenance;
• Fault, Warning, operator error, alarm will be smart tips;
• Built-in CF calibration coefficients (VOC measurements only valid);
• With audible alarm, visual alarm function, the status bar also displays alarm status;
• Full-color 3.5-inch TFT screen, color LCD display and intuitive;
•  Can be both digital and curve display of gas concentration in two ways;
• With USB communication port, you can speed 9600 bytes to communicate directly with the computer;
• With test record function, can store a month’s measurement data and instrument or computer can view the data;
• With alarm recording function, you can record the last four times the alarm time and type;
• With calibration record; can record the last four times the size of the calibration time span;
• High-capacity lithium battery-powered, rechargeable, low battery automatic shutdown;
• Can be set high reported, underreporting, TWA, STEL, shutdown time, pump speed, etc.;

Portable Infrared Gas Detector MSF6-2000 Specifications:

Technical Parameter