Battery testers – Marmonix Test and Measuring Tools

Automotive Battery System Tester MBT-100

marmonix — Sat, 24 Dec 2022 11:54:45 +0000

Automotive Battery System Tester MBT-100

MBT-100 is a tester that provides the operators a fine and reliable monitoring of the conditions of the 12/24v batteries.
This device is a widely used tool to detect the bad cell of the batteries in a short time with the acceptable accuracy

Automotive Battery System Tester MBT-100 Features

Four tests Battery status test, Engine activation test, Maximum load test and Charging system test fully diagnose the battery status and car charging system.
Rich Parameters measured and displayed for battery condition diagnose
Overload protection and wrong connection protection keeps operator always safe
Easily read out conclusion of battery condition good/OK/pay attention/replace
Conforms to CAT III 600V
Test 12V/24V Batteries
Battery Recharge Indicator
Reverse Polarity Protection
Detects and Displays Bad cell
Loose Lead Detection
Internal Unit Conversion EN,EIC,DIN
Overload protection of input voltage

Automotive Battery System Tester MBT-100 Specifications:

Parameter	Values
CCA Range	100~1700
IEC Range	100~1000
EN Range	100~1700
DIN Range	100~1000
JIS Range	Reference table in manual
Displays Battery Internal Resistance	Display ohms
Displays Battery Voltage	Display volts
Cable Length	700mm
Dimension	180(L) x 90(W) x 32(H) mm
Weight	400 g

Battery Hydrometer MBT-50

marmonix — Tue, 20 Dec 2022 05:18:43 +0000

Battery Hydrometer MBT-50

1. Introduction
This hydrometer use to measures the acid concentration of storage batteries to determine battery charge.

2, Instrucion of use
First to install the tester carefully, let the big head glass tube which has sensing material in stay bellow, then fit the rubber tail at the bottom.
Hold the tester vertically, put the rubber tail into the testing liquid, squeeze the ball and inhale enough liquid to enable the inner glass tube move freely.
The mark on the inner glass tube which is equivalence with the surface of liquid indicate the condition:
Red: 1100-1205 discharged
White: 1205-1260 low charge
Green: 1260-1300 fully charged

Battery Hydrometer MBT-50 Specifications:

Model NO.: MBT-50
Standard: Degree
Accuracy: 0.001
Display: Scale
Material: Oil
Size: 320*46(Mm)

Concentration Meter MBT-300

marmonix — Mon, 19 Dec 2022 12:32:17 +0000

Concentration Meter MBT-300

The portable digital densitometer represents the highest level of field density measurement technology. The delicate design meets the application needs of most users, providing a variety of optional data (such as density, specific gravity, or sample concentration percentage, etc.). Users can obtain clear and bright real time data by pressing the sample of the built in pump gently. It is based on the well known resonant tube technology and is very elaborate in design. Users can easily measure many samples; if they need to store data, just press the storage key lightly; with built in large memory, they can store 100 data and export it to a computer or printer.

Concentration Meter MBT-300 Specifications:

Patents granted	Smart connection of measuring cell: Patent AT516421 (B1), EP3015847 (B1)
Other special functions	Viscosity correction for reliable measurements, also on highly viscous samples Gesture control for easy one-handed measurements Identification of results outside your specified limits
Measuring range	Density: 0 g/cm³ to 3 g/cm³ Temperature: 0 °C to 40 °C (32 °F to 104 °F)*
Accuracy	Density: 0.001 g/cm³ ** Temperature: 0.2 °C (0.4 °F)
Repeatability, s.d.***	Density: 0.0005 g/cm³ Temperature: 0.1 °C (0.2 °F)
Reproducibility, s.d.***	Density: 0.0007 g/cm³
Resolution	Density: 0.0001 g/cm³ Temperature: 0.1 °C (0.1 °F)
Ambient temperature****	Standard Version: -10 °C to +50 °C (14 °F to 122 °F) Ex and Ex Petrol version: -10 °C to +40 °C (14 °F to 104 °F)
Supported measuring units	Specific gravity Alcohol tables Sugar/extract tables API functions H2SO4 tables Ten programmable custom-specific measuring units
Sample volume	2 mL
Dimensions (L x W x H)	245 mm x 103 mm x 126 mm
Data memory	1024 measured results, 30 measuring methods, 250 sample IDs
Power supply	Three 1.5 V LR06 AA alkaline batteries
Weight	660 g
Interfaces	Bluetooth®, RFID (both included by default)
Protection class	IP54 (first digit: 5 – protection against dust ingress; second digit: 4 – protection against splash water from any direction)
Intrinsic safety of Ex and Ex Petrol version	Ex II 2 G Ex iB IIC T4
Scope of supply	Portable density meter, filling tube, adapter for syringe filling, syringes, transportation suitcase, rubber protection for measuring cell, three batteries, Allen key, instructions
Menu language	English, German, Chinese, Japanese, French, Russian, Italian, Portuguese, Turkish
Available options	Elongated filling tube Portable thermal printer with Bluetooth® interface Bluetooth® USB adapter Wristband Carrying strap ISO calibration
	* Measurements up to 100 °C possible Viscosity <300 mPa•s, density <2 g/cm³ * according to ISO 5725 **** Sample must not freeze within the measuring cell; Ex and Ex Petrol version: -10 °C to +40 °C (14 °F to 104 °F)

Concentration Meter With Protection MBT-300 ex

marmonix — Mon, 19 Dec 2022 12:22:17 +0000

Concentration Meter With Protection MBT-300 ex

The portable digital densitometer With EX Protection Certificate represents the highest level of field density measurement technology. The delicate design meets the application needs of most users, providing a variety of optional data (such as density, specific gravity, or sample concentration percentage, etc.). Users can obtain clear and bright real time data by pressing the sample of the built in pump gently. It is based on the well known resonant tube technology and is very elaborate in design. Users can easily measure many samples; if they need to store data, just press the storage key lightly; with built in large memory, they can store 100 data and export it to a computer or printer.

Concentration Meter With Protection MBT-300 ex Specifications:

Patents granted	Smart connection of measuring cell: Patent AT516421 (B1), EP3015847 (B1)
Other special functions	Viscosity correction for reliable measurements, also on highly viscous samples Gesture control for easy one-handed measurements Identification of results outside your specified limits
Measuring range	Density: 0 g/cm³ to 3 g/cm³ Temperature: 0 °C to 40 °C (32 °F to 104 °F)*
Accuracy	Density: 0.001 g/cm³ ** Temperature: 0.2 °C (0.4 °F)
Repeatability, s.d.***	Density: 0.0005 g/cm³ Temperature: 0.1 °C (0.2 °F)
Reproducibility, s.d.***	Density: 0.0007 g/cm³
Resolution	Density: 0.0001 g/cm³ Temperature: 0.1 °C (0.1 °F)
Ambient temperature****	Standard Version: -10 °C to +50 °C (14 °F to 122 °F) Ex and Ex Petrol version: -10 °C to +40 °C (14 °F to 104 °F)
Supported measuring units	Specific gravity Alcohol tables Sugar/extract tables API functions H2SO4 tables Ten programmable custom-specific measuring units
Sample volume	2 mL
Dimensions (L x W x H)	245 mm x 103 mm x 126 mm
Data memory	1024 measured results, 30 measuring methods, 250 sample IDs
Power supply	Three 1.5 V LR06 AA alkaline batteries
Weight	660 g
Interfaces	Bluetooth®, RFID (both included by default)
Protection class	IP54 (first digit: 5 – protection against dust ingress; second digit: 4 – protection against splash water from any direction)
Intrinsic safety of Ex and Ex Petrol version	Ex II 2 G Ex iB IIC T4
Scope of supply	Portable density meter, filling tube, adapter for syringe filling, syringes, transportation suitcase, rubber protection for measuring cell, three batteries, Allen key, instructions
Menu language	English, German, Chinese, Japanese, French, Russian, Italian, Portuguese, Turkish
Available options	Elongated filling tube Portable thermal printer with Bluetooth® interface Bluetooth® USB adapter Wristband Carrying strap ISO calibration
	* Measurements up to 100 °C possible Viscosity <300 mPa•s, density <2 g/cm³ * according to ISO 5725 **** Sample must not freeze within the measuring cell; Ex and Ex Petrol version: -10 °C to +40 °C (14 °F to 104 °F)